You can connect your new terminal to your POS by following the steps below. Please make sure that
you have your POS Pairing guide (provided by your POS vendor) handy before you start pairing/
connecting POS activity.
1. From the terminal, press the ‘Func’ key, and enter 7410 into the terminal and press the ‘ENTER’ key.
2. Terminal will show three options on the Cloud Wizard as below:
- Cloud Diagnostics
- Terminal Setup
- Current Settings
3. Select the ‘Terminal Setup’ from the landing screen.
4. Select ‘Begin’ or press ‘Enter’ on Terminal Setup screen.
5. Select ‘Cloud Comms’ from the ‘Select Communication Type’ screen.
6. If network connectivity is via ethernet, plug the ethernet cable into the terminal. Go to step 14 now
if connectivity is via ethernet.
7. If the network connectivity is via Wi-Fi, select ’Setup Wi-Fi ‘ button or press 1 from terminal.
8. Let the Slave app search for the available networks.
9. If the Wi-Fi network you are looking for is not available, try to rescan the networks by pressing the
‘RESCAN’ button.
10. Select the preferred Wi-Fi network.
11. Enter password if prompted.
12. Once the password is entered, the Slave app will display ‘Connecting’ and once the network
connection is successful, it will display ‘Connected’.
13. Press ‘Next’ button on the Wi-Fi settings information displayed screen. This will test the connection
to cloud.
9
14. Testing Connection screen will be displayed and if connection is successful it will display ‘Setup
Complete’.
15. Press ‘OK’ to go to the landing screen.
16. Press the ‘CANCEL’ button on the landing screen to go to the idle screen.
Note: If connected successfully, the terminal should display ‘CLOUD ONLINE’ immediately followed
by ‘EFT-CLIENT CONNECTING...’.
17. If connected unsuccessfully, the terminal should display ‘CLOUD CONNECT FAILURE’.
18. If the terminal is setting up for cloud for the first time (FUNC 7410 CLOUD ONLINE), the terminal
will display ‘PINPAD PAIRING PRESS ENTER’ message after CLOUD ONLINE message.
19. Press ‘ENTER‘ button on the terminal.
20. The terminal will generate a 6-digit pairing code that the user will need to enter into the POS.
21. There is a time limit of 180 seconds to complete the pairing to the Point of Sale using this code. If
the pairing takes longer, the solution will time out and return to the Cloud Online screen.
22. Note down the pairing code generated on the terminal screen.
23. Navigate to the Point of Sale and perform the activity outlined in your POS pairing guide.
Note: In the Point of Sale, you will need to enter the credentials supplied by Linkly via email and the
Pairing Code displayed on the terminal screen.
Once the above steps are completed, the POS will show that it is connected. Bank logon from POS will
be initiated and the terminal will display’ EFT-CLIENT CONNECTING...’ before returning to the
idle screen.
Depending on the communications type used, the terminal will display either a green Wi-Fi or
ethernet symbol to show successful connection.
The terminal will also display a cloud icon on the idle screen. A green tick will be displayed if the
terminal is successfully connected to Linkly Cloud