Venue will need to know the Manager Password to access the settings


  1. Press Menu Key 
  2. Select the Option Terminal. 
  3. Select the Option "Others"
  4. Select the Option Manager Menu. 
  5. Enter the Manager/Terminal Password and Press Enter
  6. Select Terminal Settings on the screen
  7. Select Communication Means 
  8. Tap Bluetooth
  9. Tap Base
  10. Tap Association
  11. Tap New Base

A Message will displayed on the screen to advise if the pairing was successful or unsuccessful

If Successful Press the Red Cancel Button all the way out to the Main screen


If base was previously paired it might be a good idea to remove the current base and re add a new one.


Follow the steps above to point 10, then perform the following:

  1. Tap Remove Base (Make note of the Base ID) A Message will pop up saying Base Removed, this will then take you to the Previous Screen
  2. Tap New Base

A Message will displayed on the screen to advise if the pairing was successful or unsuccessful

If Successful Press the Red Cancel Button all the way out to the Main screen